Company Options and what they mean
This folder will go over all the Company options and the definition of what each one will do.
This option, when checked, will require a Note to be added for every Calibration record. If this option is checked and there is not a Note entered on the...
Thu, 9 Jul, 2020 at 10:42 AM
This option, on the Company screen, Options tab, allows the Tester during Calibration to override the "Keep On Schedule" set on the master record....
Tue, 9 Feb, 2021 at 2:38 PM
This option, on the Company screen, Options tab, when selected will override the Frequency's setting of "Allow system to Roll Date Forward if Actua...
Tue, 9 Feb, 2021 at 3:44 PM
When this option is checked, then a User will be able to Finalize a Calibration record that has been saved as "Incomplete" If this opti...
Wed, 8 Jul, 2020 at 2:41 PM
If this option is not checked, then Technicians will be able to change the Accuracy of the Group specs during a Calibration. Most Companies Will check thi...
Wed, 8 Jul, 2020 at 3:27 PM
There is an Option to Require a Reason on the Calibration screen when a Failing Calibration is entered. When this option is checked and a Failed Calibrat...
Thu, 9 Jul, 2020 at 1:53 PM
There is an option on the Company screen, that when checked, will Not show Test Instruments on the Calibration screen. If you have Test Instruments that are...
Thu, 9 Jul, 2020 at 4:08 PM
To Prevent or Warn a Technician when they select a Test Instrument during Calibration if that Test Instrument is not Approved Allow - Technicians will...
Wed, 10 Feb, 2021 at 10:03 AM
On the Company screen, Options tab, there is a setting that allows a user to set the Control Limits to be greater than the Spec Limits. Typically the ...
Wed, 24 Mar, 2021 at 4:37 PM
This dropdown will have three choices and are related to the Calibration screen. If any Group has an As Found Value that is Out Of Tolerance, (OOT) this set...
Fri, 14 May, 2021 at 3:38 PM