Calibration Scheduled Date must be before Current Due Date : Prime Technologies, Inc.

Calibration Scheduled Date must be before Current Due Date Print

Created by: Robert Efford

Modified on: Wed, 8 Jul, 2020 at 11:38 AM

Available on Releases 5.8.0.3 and up.

This option, when checked, will prevent a User from setting the "Scheduled Date" on the Calibration screen to a Date that is greater then the "Next Cal Date" on the master record.

Example - The screen shot below shows an Instrument record that has a "Next Cal Date" of 01-Jul-2020

When a new Calibration record is entered for this record, the "Next Cal Date" from the Instrument will be the same as the "Scheduled Date" on the Calibration record, see below:

If the Technician were to leave everything as it is, the Calibration would be Late by one day.

With the Option checked, they would not be able to move the "Scheduled Date" to a Date that is greater than 01-Jul-2020.

Robert is the author of this solution article.

Did you find it helpful? Yes No

Calibration Scheduled Date must be before Current Due Date Print

Related Articles