Fluke Calibrator
Navigate to the Upload/Download page. Make sure you have your calibration device connected and powered on. Go to Features → Clear Calibrator Memory ...
Thu, 6 Jun, 2019 at 9:27 AM
User Entered values with the Drywell as Source and a computer readout as Measure. Scenario: User needs to run a calibration in which they are sourcing ...
Fri, 26 Apr, 2019 at 1:36 PM
Navigate to the Upload/Download page. Make sure you have your calibration device connected to your computer and powered on. Go to Features → Set C...
Thu, 6 Jun, 2019 at 9:33 AM
Instructions to enable the debug logging: 1. Right click on application shortcut to bring up Properties. The “Target” field will be something...
Wed, 15 Apr, 2020 at 2:30 PM
User Entered values with the Pressure Module + Pump as Source and user entry as Measure. Scenario: User needs to run a calibration in which they are so...
Fri, 31 Jul, 2020 at 4:02 PM
Message: "You do not have access to add Calibration records. Contact your System Administrator to gain access. (138)" Reasons: 1. You have a...
Tue, 3 Nov, 2020 at 9:19 AM
Signal Types with Multiplier and Base Units Signal Type Multiplier Base Unit bar 1 BAR (Bars) Deg C 1 DEGC (Degrees Celsius) F ...
Fri, 11 Jun, 2021 at 3:04 PM
User Entered values with some external source of temperature, or ambient temperature target. Scenario: User needs to run a calibration in which they ar...
Wed, 15 Jun, 2022 at 11:59 AM
When selecting a base unit for a signal type, only some are compatible with Fluke calibrators. Similarly for when a Custom Base Unit is selected for a S...
Tue, 16 Aug, 2022 at 10:30 AM